Filter
Top Products
4 Replacement Procedures 4.34 TFT FL (Model 15.0 UXGA SHARP LQ150U1LW13)
4-162 Satellite Pro M10 Series Maintenance Manual (960-431)
5. Seat the LCD panel on the backlight unit assembled by the steps above. Make sure
there is no dust between the LCD panel and the backlight unit. If you find any foreign
matter, remove it.
Guide rib
Make sure the LCD panel fits
into the panel guide ribs.
LCD panel
Backlight unit
Figure 4-140 Installing the LCD panel
6. Fold the TCP of the source PCB, then the TCP of the gate PCB down.
Do not grasp both ends.
Do not grasp both ends.
TCP of source PCB
TCP of gate PCB
Figure 4-141 Folding TCPs down