Filter
Top Products
Installation Inspection
2
Installation
Inspection
When you receive the instrument, inspect it for any damage that may have occurred
during shipment. In case of damage, notify immediately your carrier and our local
representative.
Items Supplied
Check that the following items are supplied with the unit:
1) One CD-ROM (with: User’s Guide, Programming Manual, Soft Panel and
Demonstration Software, Software drivers, Tutorial presentation)
2) One printed User’s Guide (this guide).
3) One printed Programming Manual.
4) One printed quick reference guide.
5) One printed function keys reference card.
6) Four screws for replacing the unit's legs (i.e. for “L” shaped rail mounting).
7) One male load connector per power module, including pins and back-shell.
8) One On-Off control connector.
9) One diagram with the modules' location and modules' addresses.
10) One warranty document.
WARNING
The XMP 2600 must be operated at the proper mains voltage, as specified in
page ii under the title “Input Mains Voltage Rating”. Before operating the unit
make sure the mains voltage complies with the unit’s specified voltage range.
Noncompliance with the input voltage may cause fire hazard and damage to the
unit!
XMP 2600 User’s Guide
rev. 1.0 5