Filter
Top Products
System parameters Power Supply setup
How to select a value
Use the UP / DOWN selection keys to select the desired behavior for the buzzer, as
detailed in the table below.
BUZZER will sound Description
NEVER
The audible alarm is disabled.
ON FAULTS
The audible alarm will sound when a fault or
warning event occurs. To silence the alarm, press
any key.
ALWAYS
The audible alarm will sound when a fault or
warning event occurs. To silence the alarm, press
any key.
A short beep will be heard when an illegal key is
pressed or erroneous value entry is made.
Setting the
power-on
retain
behavior
The power-on retain function controls whether the XMP 2600 power supply system
will remember its last settings when power is cycled.
In addition to the ten storage areas at the users disposal, the XMP 2600 has a storage
area dedicated to keeping the current settings of all the power modules and the state
of the global output enable. The power-on retain mechanism uses that storage area.
How to get there
Use the LEFT / RIGHT selection keys to move the cursor to the ON parameter.
What is displayed
The upper row of the display shows the selected state of the power-on retain
function.
Power-on retain
selection
condense
d
modules status
syste
m
p
arameters to se
t
syste
m
symbol
Setup mode display – power-on retain selection
How to select a value
Use the UP / DOWN selection keys to select a value for the power on retain
function:
80 XMP 2600 User’s Guide rev. 1.0