Filter
Top Products
Environmental Notices and Statements 3
6-00020-02
SNC 5100
Step 2. Check the voltage label on the bottom of the device to ensure it
matches the voltage at the power source.
Step 3. Check the voltage level at the power source.
Fusing Requirements
The SNC 5100 power supply has a 3.15 A, 250 VAC time delay fuse on the AC
line input, and the AC harness uses an axial lead, 3A, 250 VAC time delay fuse
in the neutral line. There are no user-serviceable parts in the SNC 5100.
Environmental Notices and Statements
Product Recycling
This unit contains recyclable materials. These materials should be recycled
where processing sites are available and according to local regulations.
Lithium Battery
DANGER
Risk of fire, explosion, or burns. Do not short circuit, crush, heat above 100 C,
incinerate, or disassemble the battery.
Laser Safety
This unit may contain a single-mode or multi-mode transceiver, both of which
are Class 1 laser products. The transceiver complies with IEC 825-1 and FDA
21 CFR 1040.10 and 1040.11. The transceiver must be operated under the
recommended operating conditions.