ADIC SNC 5100 Network Card User Manual


 
SNC 5100
12 Hardware Product Description and Features
6-00020-02
Cables should have a duplex SC connector on the GBIC end and a connector
appropriate to the HBA in use on the host end.
Fibre Channel interfaces support the following Public and Private Loop modes:
Target
Initiator
Target and Initiator
The maximum number of initiators connected via Fibre Channel is 64 per
Fibre Channel port.
Fibre Channel Interfaces also support the following connection options:
Loop
Point-to-Point
Loop Preferred
The Fibre Channel controller is compliant with the following standards and
specifications:
Fibre Channel Arbitrated Loop (FC-AL-2) working draft, rev 6.4, August
28, 1998
Fibre Channel Fabric Loop Attachment (FC-FLA) working draft, rev 2.7,
August 12, 1997
Fibre Channel Private Loop SCSI Direct Attach (FC-PLDA) working
draft, rev 2.1, September 22, 1997
Fibre Channel -- Tape and Tape Medium Changers (FC-Tape), Rev 1.17,
Technical Report, T11/99-069v4
Fibre Channel protocol SCSI (FCP-SCSI)
Ultra2 SCSI I/O Interfaces
Four Low Voltage Differential (LVD) Ultra2 SCSI channels with internal
termination.
SCSI channels have automatic speed and width negotiation capability for
wide or narrow bus widths and Standard, Fast, Ultra or Ultra2 speeds.
SCSI channel support for up to 15 SCSI target IDs and up to 32 LUNs per
ID (subject to an overall total of 2048 devices). The SNC 5100 uses one