ADIC SNC 5100 Network Card User Manual


 
SNC 5100
198 POST Boot Behavior
6-00020-02
Initial POST
Figure 11 Initial POST
IpostMain
starts by initializing the service-port and the system PLD(s). The
ERR LED will extinguish and the RDY LED will turn on. POST will display
the following message on the service port:
== POST Version nnn ==
Simple Access Test
Figure 12 Simple Access
The simple access test verifies that the processor can perform basic writes and
reads to the SDRAM. This test is identified by the flash of the FC1 LED.