ADIC SNC 5100 Network Card User Manual


 
Ethernet MAP 71
6-00020-02
SNC 5100
If they are not, inform the system administrator that there is a
network hardware problem where the SNC 5100 is attached.
Exit this MAP.
Step 9. Remove the Ethernet loop back plug.
Step 10. Obtain another Ethernet cable.
Step 11. Use this cable to attach the SNC 5100 to the local area network.
Step 12. Connect the service terminal to the Service Port.
For more information, see Connecting to the Service Port on
page 95.
Step 13. Press the Enter key on the service terminal.
If the prompt is not displayed, go to Service Port MAP on
page 75.
Step 14. From the service terminal, enter the
ifShow command.
For more information, see the "ifShow" command on page 139.
Example:
SN60023 > ifShow
ibmEmac (unit number 0):
Flags: (0x8063) UP BROADCAST MULTICAST ARP RUNNING
Type: ETHERNET_CSMACD
Internet address: 172.16.76.211
Broadcast address: 172.16.255.255
Netmask 0xffff0000 Subnetmask 0xffff0000
Ethernet address is 00:60:45:17:02:f0
Metric is 0
Maximum Transfer Unit size is 1500
114192 packets received; 364 packets sent
114023 multicast packets received
116 multicast packets sent
0 input errors; 0 output errors
0 collisions; 0 dropped