ADIC SNC 5100 Network Card User Manual


 
Virtual Private SAN®Scalar Firewall Manager Settings MAP 79
6-00020-02
SNC 5100
If the host cannot access all of the target devices, then there is a
problem with the devices or their SAN connections. Proceed
toDevice Access MAP on page 48 or Fibre Channel MAP on
page 61.
Step 5. Shut down all of the hosts.
Step 6. Enter the
sfmActiveSet command from the service terminal.
For more information, see the "sfmActiveSet" command on page
165.
Step 7. Use the ADIC Management Console to verify the host and target
device access settings.
For more information, see the ADIC Management Console User
Guide.