ADIC SNC 5100 Network Card User Manual


 
Operating Specifications 17
6-00020-02
SNC 5100
Power Consumption
The power consumption of this product depends on the number and type of
installed interface options. Maximum power consumption is 45 watts in active
mode. The SNC 5100 can provide up to 3.25 watts of termination power per
SCSI channel.
Power Requirements
The power supply status is monitored as part of the Enclosure Monitor Register
and is reported by the front panel LED.
For more information on LEDs, see the ADIC Management Console User
Guide.
Input voltage range of 85-264 VAC, 47-63 Hz.
Maximum power draw for the 90 watt supply running at 72% typical
efficiency is 65 watts.
Maximum input current of 1.05 amps max at 120 VAC, 0.51 amps max at
230 VAC.
Input surge current (cold start) of 17A at 120 VAC, 32A at 230 VAC.