ADIC SNC 5100 Network Card User Manual


 
SNC 5100
34 Event Codes and Actions
6-00020-02
Event Codes and Actions
Review all visual observations and Event Codes against Table 7 on page 35.
Check Event Log
Step 1. To determine what Events are in the Event Log, follow the
procedures in the ADIC Management Console User Guide.
Step 1. If the ADIC Management Console application is not available,
connect a service terminal to the SNC 5100.
For information about how to do this, see Connecting to the
Service Port on page 95.
Step 2. Press the Enter key on the service terminal.
If the prompt is not displayed, go to Service Port MAP on
page 75.
Step 3. Issue the
loggerDump command from the service terminal.
For more information, see the
"loggerDump [number]"
command on page 141.
Messages that looks like the ones in Figure 5 display:
Figure 5: Event Log Listing From Service Port