ADIC SNC 5100 Network Card User Manual


 
Commands 115
6-00020-02
SNC 5100
The above example shows the clearReservation command being used to
clear a reservation on a target device at LUN 4.
cleHelp
The
cleHelp command displays a list of the Command Log Event facility
commands.
SN60023 > cleHelp
CLE - Command Log Event facility
cleShow <lun> - Displays Logged Events for a specific LUN
cleShowAll - Displays Logged Events for All LUNs
value=0=0x0
SN60023 >
cleShow <LUN>
The
cleShow command displays the last 64 Command Log events for a device
at the specified LUN. The manufacturer may request the contents of the
command log for diagnostic purposes. Information about interpreting these
events is not provided.
cleShowAll
The
cleShowAll command performs a cleShow for all LUNs. The
manufacturer may request the contents of the command log for diagnostic
purposes. Information about interpreting these events is not provided.
csClearLogFile
The csClearLogFile command clears the contents of the event log.
SN600726 > csClearLogFile
value=0=0x0
SN600726 >
date
The
date command displays the systems date and the time.
The system may be set to read its local Real Time Clock (see the
dateSetFromRTC command) or a remote host. See the rdate timeserver
command.