ADIC SNC 5100 Network Card User Manual


 
SNC 5100
168 Commands
6-00020-02
string for the specified host connection index. The following command
example shows setting the host name for host Id 1 to LANDERS. Existing
hostindex and name values can be determined by looking at the Id and Host
Name columns in the output of the
sfmShow -1 command.
SN60023 > sfmNameSet 1,"LANDERS"
value=0=0x0
SN60023 >
sfmShow [hostIndex]
The
sfmShow command displays information about hosts that have been
registered with Scalar Firewall Manager based on the value of hostIndex.
The following command example shows SFM information for the hosts that
have been registered by SFM. Hosts that have the Host Registration Service
running with periodic re-registration are shown with a status of Periodic. One
of the hosts has more than one Fibre Channel connection to the Pathlight
5000SNC 5100.
SN60023 > sfmShow -1
SFM State: Active
Id World Wide Name St. Typ HexFlags Status Host Name Host Type
Host Connection
--- ----------------- --- --- -------- --------- ---------- --
001 200000e0.8b0057d8 000 001 00000000 Online LANDERS NT 4.0
SP5 ScsiPort6 [0:0:0](QLA2200)
002 200000e0.8b16014d 000 001 00000000 Periodic SUPERIOR NT 4.0
SP5 ScsiPort7 [0:0:0](QLA2200)
003 200000e0.8b160152 000 001 00000000 Offline SUPERIOR NT 4.0
SP5 ScsiPort7 [0:0:0](QLA2200)
value=0=0x0
SN60023 >
Hostindex Meaning
-1 Displays brief list of all known host connections
0 Full display of all known host connections, and if online displays a list of all
LUNs available to that connection
N (1-48) Display the full information for the host N only