ADIC SNC 5100 Network Card User Manual


 
Setting the Time and Date 103
6-00020-02
SNC 5100
For more information, see the "setTimeHost" command on page
164.
Example:
SN60023 > setTimeHost butter
Time Host butter value=0=0x0
SN60023 >
Step 3. Set the remote system as the source of date/time display using the
rdate command.
For more information, see the "rdate timeserver" command
on page 150.
Example:
SN60023 > rdate butter
Get time from butter using UDP/SNTP
value=0=0x0
SN60023 >
Step 4. 4. Use the tzSet command to set the timezone
In the following example, EST is used for Eastern Standard Time.
Example:
SN60023 > tzSet ESTTZ Set TIMEZONE =
EST:EDT:300:040202:101502 value=0=0x0
SN60023 >
Step 5. 5. To confirm, use the date command.
For more information, see the "date" command on page 115.
Example:
SN60023 > date WED JUL 18 14:51:59 2001 value=0=0x0
SN60023 >
Disabling the Timeserver Host
Step 1. To disable the timeserver functionality, use the setNettime
command.