ADIC SNC 5100 Network Card User Manual


 
Commands 155
6-00020-02
SNC 5100
string:
SN60023 > rtcDateSet 2001,1,26,5,9,30,00
value=0=0x0
SN60023 >
Caution:
The time will be one hour off when Daylight Savings Time is in
effect.
rtcSetCurrent
The
rtcSetCurrent command is used after the rdate timeserver
command in order to synchronize the local Real Time Clock with the
timeserver running on a remote host. Use the
date command to see the
synchronized settings.
SN60023 > rtcSetCurrent
value=0=0x0
SN60023 >
rz
The
rz command initiates a receive Zmodem file transfer session. You use this
command when you want to download a file from the service terminal to the
SNC 5100. The file can be either a firmware or configuration file. After issuing
this command, you start the file transfer from the service terminal by initiating
a send file operation that uses Zmodem protocol.
The example below shows the
rz command when it is used to receive a file that
contains operational firmware. The SNC 5100 extracts individual firmware
modules from the file and saves them temporarily in memory. After the file
transfer has completed, the SNC 5100 copies the firmware modules to
nonvolatile flash memory. The SNC 5100 must be rebooted to use the updated
firmware.
SN60023 > rz
**B000000023be50
Firmware Update in Progress....
Found Image File BOOTROM.IMG loading
.........Found Image File IPOST.IMG loading
.........Found Image File SPOST.IMG loading
Firmware Update Complete. Reboot for Update to Take Effect.
value=0=0x0