Filter
Top Products
TRACER 6000 Series Integrated System Manual Section 6 DLP-4
612806420L1-1F 101
3. Telnet to the TRACER 64x0.
From the same computer used in the previous step, Telnet to the TRACER 64x0 and verify that the
Telnet session is properly opened. Once the Telnet session is established, press <Ctrl+z> to logout of
the session and return to the Login screen. Pressing <Ctrl + z> again closes the Telnet session.
Refer to the documentation of the computer system if you are unsure how to initiate a
Telnet session. Most computers running a networked version of Microsoft Windows® or
UNIX initiate a Telnet session by typing telnet <IP Address> at a command line prompt.
The Windows XP HyperTerminal program also provides a Telnet client. Telnet is a utility
common on many local area networks, and allows remote access to another computer or
piece of equipment.