Filter
Top Products
Section 5 User Interface Guide TRACER 6000 Series Integrated System Manual
80 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F
>ETHERNET SWITCH STATUS > RX PACKETS
Displays a counter of all data packets received on the local and remote TRACER 64x0 Ethernet interfaces
and WAN (RF link). Use this data as an indicator of how many packets are being received on the four
Ethernet interfaces versus being received over the wireless link.
>ETHERNET SWITCH STATUS > RX PACKETS DROPPED
Displays a counter of all received data packets that were unable to be processed due to congestion inside
the TRACER 64x0 switch (for both the local and remote TRACER 64x0 units). Use this data as an
indicator of congestion inside the TRACER 64x0 switch.
>ETHERNET SWITCH STATUS > RX PACKET ERRORS
Displays a counter of all received data packets that are greater than or equal to 64 bytes in length and have
either an FCS error or an alignment error (for both the local and remote TRACER 64x0 units).
RX PACKET
E
RRORS on the WAN interface (RF link) could indicate link degradation (due to interference, fading, etc.).
> MANAGEMENT/UTILITIES (MAIN SCREEN)
Figure 30 shows the TRACER 64x0 Management/Utilities main screen, which contains access to the
SNMP configuration, firmware upgrade options, and a ping utility for Ethernet testing.
Figure 30. Management/Utilities (Main Screen)
If the RF link goes down, some packet errors may display. Once the TRACER 64x0 system
recognizes the link is down (an active RF Low alarm), packet errors will NOT increment.