Filter
Top Products
TRACER 6000 Series Integrated System Manual Section 6 DLP-5
612806420L1-1F Copyright © 2005 ADTRAN, Inc. 105
UPGRADE IMAGE IS INVALID Indicates that the system image was not verified as a valid image for
the specified update. Before the firmware upgrade begins, the
TRACER 64x0 verifies that the image is valid. If it is not valid for the
system, U
PGRADE IMAGE IS INVALID displays.
W
AITING FOR SC TRANSFER
TO BEGIN
Indicates that the local system is waiting to transfer the firmware
upgrade information to the remote system over the service channel.
Service channel communications over the RF link allow a user
connected to a local system to upgrade the firmware of a remote
system. Before the remote system begins the firmware upgrade
process, a complete copy of the new firmware image must be received
and stored in the remote system. This is done automatically when the
remote system is chosen from the U
PGRADE DESTINATION field.
R
ECEIVING SC TRANSFER Indicates that the system is receiving the firmware upgrade information
from the remote system over the service channel. Service channel
communications over the RF link allow a user connected to a local
system to upgrade the firmware of a remote system. Before the remote
system begins the firmware upgrade process, a complete copy of the
new firmware image must be received and stored in the remote system.
This is done automatically when the remote system is chosen from the
U
PGRADE DESTINATION field.
R
EADY TO BEGIN SENDING SC
T
RANSFER
Indicates that the local system is ready to transfer the firmware upgrade
information to the remote system over the service channel. Service
channel communications over the RF link allow a user connected to a
local system to upgrade the firmware of a remote system. Before the
remote system begins the firmware upgrade process, a complete copy
of the new firmware image must be received and stored in the remote
system. This is done automatically when the remote system is chosen
from the U
PGRADE DESTINATION field.
S
ENDING SC TRANSFER Indicates that the local system is sending the firmware upgrade
information to the remote system over the service channel. Service
channel communications over the RF link allow a user connected to a
local system to upgrade the firmware of a remote system. Before the
remote system begins the firmware upgrade process, a complete copy
of the new firmware image must be received and stored in the remote
system. This is done automatically when the remote system is chosen
from the U
PGRADE DESTINATION field.
VERIFYING FLASH IMAGE Indicates that the system flash image is being verified as a valid image
for the specified update. Before the new firmware is loaded into the local
flash, the TRACER 64x0 verifies that the flash image is valid for the new
firmware. If it is not valid for the system, the firmware upgrade fails.
E
RASING FLASH Indicates that the system flash is being erased so the new firmware
image can be loaded into the local flash. Before the new firmware is
loaded into the local flash, the TRACER 64x0 verifies that the flash
image is valid for the new firmware. If it is not valid for the system, the
firmware upgrade fails.
P
ROGRAMMING FLASH Indicates that the new firmware image is being loaded into the local
flash. Before the new firmware is loaded into the local flash, the
TRACER 64x0 verifies that the flash image is valid for the new firmware.
If it is not valid for the system, the firmware upgrade fails.