Filter
Top Products
Section 5 User Interface Guide TRACER 6000 Series Integrated System Manual
68 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F
Figure 11. RF Link Min/Max Received Signal Quality History
The received power quality level (MIN and MAX) represents the minimum and maximum values of
received signal quality levels in 24-hour or 15-minute increments, and is displayed as a numerical value
from 0 to 100, with 0 corresponding to poor signal quality and 100 corresponding to exceptional signal
quality.
Radio links with consistently high MIN and MAX numbers should not experience
interference. Radio links with a large difference between
MIN and MAX numbers could be
experiencing fading, reflections, or intermittent interference or installation problems such
as loose connectors, damaged coax cable, water contaminated feedlines, or damaged
lightning arrestors. Radio links with consistently low
MIN and MAX numbers may be
experiencing interference, low receive levels, or installation problems. If this is the case,
examine the
RF LINK MIN/MAX RECEIVED POWER HISTORY. High received power numbers
with low received signal quality numbers indicate interference, while low received power
numbers with low received signal quality numbers indicate low receive levels or
installation problems.
Press <u> to view the next 24-hour segment (for the 7 day totals) and <d> to view the
previous 24-hour segment.
Press <f> to view the next 8-hour segment of 15-minute totals and <b> to view the
previous 8-hour segment.
7
Days
24
Hours
(8 hours
displayed
at a time)