Filter
Top Products
Section 6 DLP-5 TRACER 6000 Series Integrated System Manual
106 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F
10. When the update has successfully completed, IDLE displays in the CURRENT UPDATE STATUS field and
U
PGRADE FINISHED SUCCESSFULLY displays in the PREVIOUS UPDATE STATUS field.
The TRACER 64x0 will restart immediately and resume operation. During reset and initialization, the
RF link between the units will not be operational.
R
EQUIRED COMMUNICATIONS
L
INK IS DOWN
Indicates that a problem with the RF link or the service channel is
preventing a successful remote system firmware upgrade. Before a
firmware upgrade begins, the system verifies that communication
between all required parts is operational. If this check fails, the firmware
upgrade fails.
U
PGRADE FAILED Indicates that the firmware upgrade was unsuccessful.
U
PGRADE FINISHED
S
UCCESSFULLY
Indicates that the firmware upgrade completed successfully and the new
firmware should be loaded and running.