Filter
Top Products
Section 3 Engineering Guidelines TRACER 6000 Series Integrated System Manual
30 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F
1. EQUIPMENT DIMENSIONS
The TRACER 64x0 integrated radio is 17.2 inch (43.7 cm) W, 11.4 inch (28.9 cm) D, and
1.7 inch (4.4 cm) H, weighs 7 pounds (3.18 kg), and can be used in rackmount configurations.
2. POWER REQUIREMENTS
The TRACER 64x0 radio has a maximum power consumption of 25 W and a maximum current draw of
1.1 A (at 21 VDC).
3. REVIEWING THE FRONT PANEL DESIGN
The front panel contains an RSSI monitoring interface, a GND interface for reference with RSSI, a TEST
interface for factory use only, a DB-9
CRAFT PORT for management and configuration, an AUX RS232
interface (RJ-45) that provides an end-to-end serial port interface (at 9600 bps), and status LEDs to provide
visual information about the TRACER 64x0 system. Figure 1 identifies the various interfaces and LEDs for
the TRACER 6410 and TRACER 6420 (L2). Figure 2 identifies the various interfaces and the LEDs for the
TRACER 6420 L1. Table 1 on page 31 provides a brief description of each interface.
Figure 1. TRACER 6410 and TRACER 6420 (L2) Front Panel Layout
Figure 2. TRACER 6420 (L1) Front Panel Layout
B
C
A
D
E
F
B
C
A
D
E
F