ADTRAN 6000 Series Network Card User Manual


 
TRACER 6000 Series Integrated System Manual Section 7 MIBs
612806420L1-1F Copyright © 2005 ADTRAN, Inc. 113
TRACER6000.mib adTRACERtotalThrsESon the threshold for Total ES has been exceeded.
adTRACERtotalThrsESoff the threshold for Total ES has not been exceeded.
adTRACERtotalThsSESon the threshold for Total SES has been exceeded.
adTRACERtotalThsSESoff the threshold for Total SES has not been exceeded.
adTRACERfan1Alarm* fan 1 currently has an active alarm.
adTRACERfan1Fail* fan 1 has failed.
adTRACERfan1AlarmOff* the fan 1 alarm has turned off after it was activated.
adTRACERfan1On* fan 1 has turned back on after a fan 1 failure.
adTRACERfan2Alarm* fan 2 currently has an active alarm.
adTRACERfan2Fail* fan 2 has failed.
adTRACERfan2AlarmOff* the fan 2 alarm has turned off after it was activated.
adTRACERfan2On* fan 2 has turned back on after a fan 2 failure.
adTRACERtempAlarm* the temperature alarm has turned on due to an
increase in internal temperature.
adTRACERtempAlarmOff* the temperature alarm has turned off due to a
decrease in internal temperature.
adTRACERtxshutdown* the transmitter has shut down due to temperature
constraints.
Table 3. Traps Supported by the TRACER 64x0 (Continued)
MIB Trap This trap indicates that....
* Not supported in TRACER 64x0 models. Listed trap only applies to TRACER split systems.