Apple 850AV Computer Monitor User Manual

2Plug one end of the video cable into the Video Out port on the VCR.
Follow the instructions that came with the VCR.
3Plug the other end of the video cable into the S-video input port (
) or the composite
video input port (
) on your computer.
If the connector doesn’t slide easily into the port, realign it and try again.
Don’t use force, which could damage the computer or cable.
4Plug the dual RCA plugs on the audio cable into the left and right Audio Out ports on
the VCR.
5Plug the stereo miniplug on the audio cable into the sound input port (marked by
) on
the left side of your AppleVision 850AV Display.
Your finished S-video connections should look like this:
If you use composite video connections, your finished connections will
be similar.
6 Turn on the computer, the monitor, and the VCR.
Video Out
Audio Out ports
(left and right)
3.5-mm miniplug to dual RCA-plug cable
(available at most electronics supply stores)
input port
Sound cable
Monitor cable
(includes monitor connector
and ADB connector)
Sound input port
Using Sound and Video With Your AppleVision 850