Filter
Top Products
3Plug the other end of the video cable into the S-video input port (
æ
) or the composite
video input port (
˜
) on your computer.
If the connector doesn’t slide easily into the port, realign it and try again.
Don’t use force, which could damage the computer or cable.
4Plug one end of the dual RCA plug cable into the left and right Audio Out ports on
the VCR.
5Plug the other end of the dual RCA plug cable into the left and right audio input ports on
the back of your computer.
6Plug the stereo miniplug cable into the sound input port (marked by
≈
) on the left side of
your AppleVision 850AV Display.
7Plug the RCA plug end of the stereo miniplug cable into the audio output ports of
your computer.
Your finished S-video connections should look like this:
If you use composite video connections, your finished connections will
be similar.
8 Turn on the computer, the monitor, and the VCR.
Dual RCA-plug cable
(available at most electronics supply stores)
Audio Out ports
(left and right)
VCR
Video Out
port
S-video
input port
æ
Audio
input ports
(left and right)
-
Sound cable
Monitor cable
(includes monitor connector
and ADB connector)
51
Using Sound and Video With Your AppleVision 850
AV
Display