Filter
Top Products
Chapter 8. Device Management
139
Working Mode
If ICMP is enabled, the KVM Over the NET
TM
switch can be pinged. If it
is not enabled, the device cannot be pinged. The default is Enabled.
To permit browser access to the KVM Over the NET
TM
switch, click to put
a check mark in the Enable Browser checkbox. If browser access is not
enabled, users must use either the WinClient AP or Java Client AP
program to access the switch. The default is Enabled.
Enabling Multiuser operation permits up to 32 users to log in at the same
time to share the remote bus. If not enabled, only one user can log in at a
time. The default is Enabled.
If Force all to grayscale is enabled, the remote displays of all devices
connected to the KVM Over the NET
TM
switch are changed to grayscale.
This can speed up I/O transfer in low bandwidth situations.
If Enable Device List is enabled, the switch appears in the Server List
when using the WinClient AP (see WinClient AP Login, page 39). If this
option is not enabled, the switch can still be connected to, but its name will
not appear in the Server List.
When the Enable Adapter ID function is enabled (the default) the switch
stores adapter cable information for each of its ports, so that when you
move a KVM Adapter Cable from one port to another, it remembers the
adapter cable’s port properties information at the new location (see The
Adapter ID Function, page 28).
If this function is disabled, moving the adapter will mean having to key in
its port properties information all over again at the new port (see Port
Properties, page 86).
kn2124v-4132.book Page 139 Tuesday, January 12, 2010 5:08 PM