Filter
Top Products
KVM Over the NET™ User Manual
226
Clear Login Information
If you are unable to perform an Administrator login (because the Username and
Password information has become corrupted or you have forgotten it, for
example) you can clear the login information with the following procedure.
Note: Performing this procedure also returns all settings to their defaults.
To clear the login information (and return all settings to their defaults), do the
following:
1. Power off the switch and remove its housing.
2. Use a jumper cap to short the mainboard jumper labeled J23.
3. Power on the switch.
4. When the Link and 10/100Mbps LEDs flash, power off the switch.
5. Remove the jumper cap from J23.
6. Close the housing and start the switch.
After powering on the unit, you can use the default Super Administrator
Username and Password (see First Time Setup, page 31), to log in.
kn2124v-4132.book Page 226 Tuesday, January 12, 2010 5:08 PM