Filter
Top Products
Chapter 11. Port Operation
157
The Toolbar Icons
The meanings of the toolbar icons are explained in the table below.
Icon Purpose
Click to skip to the first accessible port on the entire installation
without having to recall the Port Access page.
Click to skip to the first accessible port previous to the current
one without having to recall the Port Access page.
Click to begin Auto Scan Mode. The
KVM Over the NET
TM
switch automatically switches among the ports that were
selected for Auto Scanning with the Port Select and Filter
functions (see Filter, page 90). This allows you to monitor their
activity without having to switch among them manually.
Click to skip from the current port to the next accessible one
without having to recall the Port Access page.
Click to skip from the current port to the last accessible port on
the entire installation without having to recall the Port Access
page.
Click to recall the Port Access page.
Click to close the toolbar.
Click to invoke Panel Array Mode (see Panel Array Mode,
page 161).
Note: The Local Console does not have this function. See the
entry below for the Local Console icon and function.
This icon is only found on the Local Console. Clicking this
button cycles you through the I/O module's compensation
mode choices (Short, Medium, Long) depending on the length
of cable used to connect a device to the switch. The length of
the line in the icon changes to indicate which choice is
selected.
kn2124v-4132.book Page 157 Tuesday, January 12, 2010 5:08 PM