Filter
Top Products
15
Chapter 2
Hardware Setup
Overview
For convenience and flexibility that allows mixing the PS/2 and USB
interfaces, as well as multiple platforms, the KVM Over the NET
TM
switch
design utilizes KVM Adapter Cables, that serve as intermediaries between the
switch and the connected devices (refer to the installation diagram on p. 16).
A separate KVM Adapter Cable is required for each server or device
connection. The model numbers of the Adapters are given in the KVM Adapter
Cables section, page 8.
Before You Begin
1. Important safety information regarding the placement of this
device is provided on page 189. Please review it before
proceeding.
2.
Make sure that the power to any device that you connect to the
installation has been turned off. You m
ust unplug the power cords
kn2124v-4132.book Page 15 Tuesday, January 12, 2010 5:08 PM