Filter
Top Products
KVM Over the NET™ User Manual
70
Virtual Media
The Virtual Media feature allows a drive, folder, image file, or
removable disk on a user’s system to appear and act as if it were
installed on the remote server.
Note: Virtual Media is only supported on remote servers connected to the
KVM Over the NET
TM
switch with KA7175 or KA7176 adapter cables.
To implement this redirection feature, do the following:
1. Click this icon to bring up the Virtual Media dialog box:.
Note: The T button at the top right brings up a slider to adjust the
transparency of the dialog box. After making your adjustment, click
anywhere in the dialog box to dismiss the slider.
2. Click Add; then select the media source.
Depending on your selection, additional dialog boxes appear to enable you
to select the drive, file, folder, or removable disk you desire. See Virtual
Media Support, page 229 for details about mounting each of these media
types.
kn2124v-4132.book Page 70 Tuesday, January 12, 2010 5:08 PM