Filter
Top Products
Chapter 11. Port Operation
163
Multiuser Operation
The KVM Over the NET
TM
switch supports multiuser operation. When
multiple users simultaneously access the switch from client computers, the
rules of precedence that apply are shown in the following table:
Operation Rule
General Each bus is independent, for the method by which users are
assigned to buses, see the next section, Users and Buses.
Each user can open his own independent GUI Main Page.
Auto Scan Mode If a user has invoked Auto Scan Mode (see page 158), and
then another user logs on and gets assigned to the same
bus, at first the new user sees the GUI Main Page – but as
soon as he accesses any port, he automatically enters Auto
Scan Mode (since he is sharing the bus with the original
user).
Any user on the bus can halt Auto Scan Mode by recalling
the GUI Main Page. When this occurs, Auto Scan Mode
stops and all the other users on the bus are switched to the
port that was being accessed when Auto Scan Mode
stopped.
Panel Array Mode
If a user has invoked Panel Array Mode (see page 161),
and then another user logs on and gets assigned to the
same bus, at first the new user sees the GUI Main Page –
but as soon as he accesses any port, he automatically
enters Panel Array Mode (since he is sharing the bus with
the original user).
Panel Array Mode continues until the original user stops it.
(Administrators can override Panel Array Mode, however.)
Only the user who starts Panel Array Mode can use the
Skip Mode (see page 159), function.
Only the user who starts Panel Array Mode can switch
ports. Other users automatically switch to the ports that
the original user selects. However, if one of the other
users does not have access rights to the port that the
original users switches to, that user will not be able to
view the port.
Individual users can increase or decrease the number of
panels they wish to view in Panel Array Mode; however,
the picture quality may decrease as the number of panels
decreases.
kn2124v-4132.book Page 163 Tuesday, January 12, 2010 5:08 PM