ATEN Technology KN4140V Switch User Manual


 
KVM Over the NET™ User Manual
204
Sun Systems
* These solutions work for most common Sun VGA cards. If using them fails
to resolve the problem, consult the Sun VGA card's manual.
Mac Systems
Problem Resolution
Video display problems with
HDB15 interface systems
(e.g. Sun Blade 1000
servers).*
The display resolution should be set to 1024 x 768 @
60Hz:
Under Text Mode:
Go to OK mode and issue the following commands:
setenv output-device screen:r1024x768x60
reset-all
Under XWindow:
1. Open a console and issue the following command:
m64config -res 1024x768x60
2. Log out
3. Log in
Video display problems with
13W3 interface systems
(e.g. Sun Ultra servers).*
The display resolution should be set to 1024 x 768 @
60Hz:
Under Text Mode:
Go to OK mode and issue the following commands:
setenv output-device screen:r1024x768x60
reset-all
Under XWindow:
1. Open a console and issue the following command:
fbconfig -res 1024x768x60
2. Log out
3. Log in
I have a KA9131 USB
adapter. Will it work with the
switch?
Yes. Although we recommend the KA9170 for new
purchases, if you already have a KA9131 you can use it
instead of the KA9170.
Problem Resolution
When I log in to the switch
with my Safari browser, it
hangs when I use the
Snapshot feature.
Force close Safari, then reopen it. Don’t use the
Snapshot feature in the future.
To use the Snapshot feature with Safari, upgrade to Mac
OS 10.4.11 and Safari 3.0.4.
kn2124v-4132.book Page 204 Tuesday, January 12, 2010 5:08 PM