Filter
Top Products
Chapter 2. Hardware Setup
17
Rack Mounting
The KVM Over the NET
TM
switch can be mounted in a 19" (1U) rack. The
mounting brackets can screw into either the front or the back of the unit so that
it can attach to the front or the back of the rack.
Rack Mounting - Front
To mount the unit at the front of the rack, do the following:
1. Remove the two screws at the front of the unit.
2. Use the M3 x 8 Phillips head hex screws supplied with the rack mount kit
to screw the rack mounting brackets into the front of the unit.
Phillips head hex
M3 x 6
Phillips head hex
M3 x 8
kn2124v-4132.book Page 17 Tuesday, January 12, 2010 5:08 PM