Filter
Top Products
KVM Over the NET™ User Manual
208
IP Address Determination
If you are an administrator logging in for the first time, you need to access the
switch in order to give it an IP address that users can connect to. There are three
methods to choose from. In each case, your client computer must be on the
same network segment as the switch. After you have connected and logged in
you can give the switch its fixed network address. (See Network, page 124.)
The Local Console
The easiest way to assign an IP address is from the local console. Refer to First
Time Setup, page 31, for details on the procedure involved.
IP Installer
For client computers running Windows, an IP address can be assigned with the
IP Installer utility. The utility can be obtained from the Download area of our
web site. Look under Driver/SW, and the model of your switch. After
downloading the utility to your client computer, do the following:
1. Unzip the contents of IPInstaller.zip to a directory on your hard drive.
2. Go to the directory that you unzipped the IPInstaller program to and run
IPInstaller.exe. A dialog box similar to the one below appears:
kn2124v-4132.book Page 208 Tuesday, January 12, 2010 5:08 PM