Filter
Top Products
Chapter 5. The User Interface
63
7. Repeat the procedure for any other macros you wish to create.
Once the system macros have been created, they are available for use on a
port-by-port basis. They get selected on a port’s Connection page (see Exit
Macro, page 92, for details).
Note: 1. Information about the Search function is given on page 61.
2. You can choose only one system macro per port.
3. Systems macros are stored on the switch, therefore macro names may
not exceed 64 Bytes; hotkey combinations may not exceed 256 Bytes;
each key usually takes 3–5 Bytes.
kn2124v-4132.book Page 63 Tuesday, January 12, 2010 5:08 PM