Filter
Top Products
Chapter 2. Hardware Setup
29
Port ID Numbering
Each server on the installation is assigned a unique Port ID. The Port ID is a
one or two segment number that is determined by the Stage Level and KVM
Port number of the KVM switch that the server is connected to.
The first segment represents the KVM Port number of the First Stage unit; the
second segment represents the KVM Port number of the Second Stage unit.
A server attached to a First Stage unit has a one segment Port ID (from 1–40)
that corresponds to the KVM Port number that it is connected to.
A server attached to a Second Stage unit has a two segment Port ID:
The second segment (from 1–16), represents the KVM Port number on the
Second Stage unit that the server is connected to. The first segment (from
1–40) represents the KVM Port number on the First Stage unit that the
Second Stage unit links back to.
For example, a Port ID of 12 - 3 refers to a server that is connected to
KVM Port 3 of a Second Stage unit that links back to KVM Port 12 of the
First Stage unit.
Port Selection
Port selection is accomplished by means of the GUI. Port selection details are
discussed in Chapter 6, Port Access.
kn2124v-4132.book Page 29 Tuesday, January 12, 2010 5:08 PM