Filter
Top Products
Projection Study workflow
1.
If noobject isselected, choose between aimingthe projectors horizontally
at a Wall or vertically at a Floor.
2.
If no object is selected, define projection dimensions.
3. Adjust "Distance"/"Throw ratio."
Keep in mind that these are relative parameters. Change one, and the
other is adjusted proportionally.
4. Choose an aspect ratio setting.
"Auto" mode chooses a combination of aspect ratios to best conform
to the desired coverage area. Alternatively, you can set all projectors
to a fixed aspect ratio.
I.1.6
Projection Study Wizard interface
Figure I.6. Projection Study Wizard interface
Projector surface
Use these settings to simulate the physical surface that will be projected upon.
Type:
This setting, Wall orFloor, definestheorientation ofcreatedproject-
ors.
Barco Pn: 60600320144
Appendix I: Workflow layoutsBarco Media Server XHD-Series User Guide