Filter
Top Products
a.
Multiple points can be selected using the Shift key.
b. Selected points are shown in red, unselected points
are shown in blue. By default, newly created points
are selected.
3.
Click on Create New Shape (the Plus sign) to create a new triangle or
quad from the selected points.
4. Repeat Steps 1 to 3 as needed to create the points and shapes that you
need.
To delete a point or a shape, select it and press the Del key.
5. Move the points and shapes until the projected image fits accurately
on the surface.
Tips
If the image contains no empty regions, define a mosaic of
your whole image starting from the four corners, in order to
preserve continuity.
•
• Keyboard shortcuts can help defining points and shapes
faster.
•
Ctrl+click can be used to create points.
•
The F key and the Del key can be used to
create and delete shapes.
•
Shift+click canbeused for multipleselection
and deselection.
Edge Warping controls
The Global section of the Calibration pane provides controls for displaying points and
shapes in the Viewport pane.
Show Wireframe:
Toggles between showing or not showing the shape wireframes.
Show Points:
Toggles between showing or not showing the points.
Reset:
Removes all points and shapes.
The Shapessection ofthe Calibration paneprovidescontrols to create, delete, ormodify
shapes.
Create New Shape (+):
Creates a new shape from selected points.
You can also use the F key to create a new shape
from the selected points.
Delete Shape (×):
Deletes the currently selected shapes.
Barco Pn: 60600320166
Appendix I: Workflow layoutsBarco Media Server XHD-Series User Guide