Filter
Top Products
2.2
Initial inspection
2.2.1
General
Before shipment, the Barco Media Server was inspected and found to be free of mech-
anical and electrical defects. As soon as the Barco Media Server is unpacked, inspect it
for any damage that may have occurred in transit. Save all packing material until the
inspection is completed. If damage is found, file a claim with the carrier immediately.
Notify the Barco sales and service office as soon as possible.
2.2.2
Unpacking
At delivery the Barco Media Server is packed in a cardboard box. Place the box on a
stable (solid), flat, and insulated support during all the unpacking. Open the box from
the top. Remove the Barco Media Server from its antistatic bag. Check the box content.
After unpacking let the Barco MediaServer acclimate to roomtemperature, which must
be higher than 0°C (32°F) and lower than 40°C (104°F). Neglecting this may result in
startup failure.
Save the original shipping box andpacking material; these will benecessary if you ever
have to ship your Barco Media Server. For maximum protection, repack your Barco
Media Server as it was originally packed at the factory.
2.2.3
Box content
After unpacking the Barco MediaServer, checkif allof thefollowing items wereincluded:
Accessories includedProduct contains
4RU rack-mount chassis • Barco Media Server assembly
• USB keyboard
• USB mouse
• USPower CordNEMA 5/15(notincluded
with units shipped to China)
1
•
3× passive DisplayPort-to-DVI adapters
2
•
2× active DisplayPort-to-DVI adapters
2
•
USB System Restore drive
3
• Safety manual
Table 2.1. Box content
Notes:
1. Barco does not provide power cords for all locations. It may be neces-
sary to install a power-cord capfor yourlocation. SeeReplacing a power-
cord cap (p.69).
Barco Pn: 6060032026
Section 2: InstallationBarco Media Server XHD-Series User Guide