Filter
Top Products
You can also use the Del key to delete selected
shapes.
Move Shape Up (↑) or Down (↓):
Moves a shape up or down in the list.
The position of a shape in the list corresponds to its
drawing order.
The Selected Point section of the Calibration pane provides controls to modify the
properties of a selected point.
Original Position X/Y:
Sets theposition inpixels ofthe selectedpoint in the
source-camera image.
Reset to Current Position:
Sets the current position of the selected point as the
source position in the camera image.
Current Position X/Y:
Sets the modified position in pixels of the selected
point.
Reset to Initial Position:
Reverts the current position of the selected point to
the original position of the selected point.
The SelectedShape panelprovides controls to modifythe properties ofaselected shape.
The points that are part of the shape also show their Point properties.
Name:
Name of the shape.
Draw Mode:
Determines how the shape is drawn and transforms the source image.
• "None" does not transform anything (disables a shape).
• "Move" moves the shape and leaves black where the
shape initially was.
• "Duplicate"copies theshape, leavingtheoriginalcontent
untouched, as opposed to "Move."
• "Mask" draws the shape all black.
Manual Blending
Unlike the Reverse Mappingtool, the2D projectorcalibration tools—Warpingand Edge
Warping—require manual blending. The Blending tool adds blending to the edges of
the selected projector. Blendingshould beused whenmorethanone projector isdisplay-
ing content inthe sameregion onthe surface. Blendingallows the seamlessand smooth
overlap between two projectors. Manual blending should not be used with Reverse
Mapping, because the Reverse Mapping tool already calculates blending.
167Barco Pn: 60600320
Barco Media Server XHD-Series User GuideAppendix I: Workflow layouts