Filter
Top Products
!
Caution
At a minimum, an XHD-400 Series server chassis weighs 13.6 kg (30 lbs.). To
avoid injury, we recommend that two people rack mount the chassis.
2.4
Connections
Make the following connections to the rear panel of the Barco Media Server.
1. Connect a monitor to the DVI port labelled “Desktop.”
(DVI cable not included.)
2. Connect keyboard and mouse to USB 2.0 ports.
3. Connect power cord.
2.5
Powering ON the Barco Media Server
Switch the master power switch on the rear panel to ON.
The Barco Media Server box turns on immediately.
Note
If the system is powered off any time after it has been initially powered on,
you can power on the system again using the power switch on the front
panel. Ifthe BarcoMedia Serverdoes not start, ensure that themaster power
switch on the rear panel is ON.
Ensure that the Barco Media Server is connected to an appropriately-rated
power source.
Warning
This equipment is designed for connection to a branch circuit having a
maximum overload protection of 20 A.
2.6
Software startup
Barco Media Server boxes come pre-installed with Microsoft
®
Windows
®
Embedded
8.1 x64 and X-Agora™. Whenthe box ispowered on,Windows opens anempty desktop
with two icons in the left-hand corner of the taskbar.
Barco Pn: 6060032028
Section 2: InstallationBarco Media Server XHD-Series User Guide