Filter
Top Products
Once the Restore has reached this point (Applying the main volume),
the Barco Media Server automatically restarts.
9. Allow a few minutes for the Barco Media Server to reconfigure.
Figure 2.13. Completion screen
After the restorationis complete, youmay remove theUSB SystemRestore thumbdrive.
2.9.2
Full System Restore
The procedurefor aFull SystemRestoreis nearly thesame asthe procedure fora System
Restore. This not only restores the application, software licenses, and settings on the
C: drive, but it erases any data on the D: drive, restoring the system to its original con-
dition.
1. Plug the USB Recovery drive into one of the external USB 3.0 ports on
the Barco Media Server.
The Barco USB Recovery drive is a USB 3.0 device; you may reduce
recovery time by using this drive in a USB 3.0 port.
2.
Right-click the Windows icon at the lower left-hand corner of the
screen to restart.
As the system restarts, it displays the Barco logo screen.
3. Press and hold the F8 key to summon the Select Boot Device screen.
4. Select the USB Recovery drive (STT ST3U16SSPS (15000MB)).
39Barco Pn: 60600320
Barco Media Server XHD-Series User GuideSection 2: Installation