Filter
Top Products
3 - 2
ON-SCREEN PROGRAMMING
Alternating Displays
When you see alternating displays, the LCD sometimes alternates between the
currently selected option, and a help message giving brief instructions about
how to proceed. The display you’ll probably see most often is shown below. It
appears when you place an original in the ADF to tell you that you can dial a
number and send a fax, or you can make a copy.
Function Selection Table
You can probably perform most of these programming settings without the
Owner’s Manual. To help you understand the function selections, options and
settings that are found in the MFC programs, use the Function Selection Table
below:
1. Fax Functions
1. INITIAL SETUP
Function Description
Factory Setting
Page
1. DATE/TIME
Enter date and time for the
LCD display and heading on
fax transmissions.
2001 1/1 00:00 4-1
2. STATION ID
Program your name, fax
number and telephone
number to appear on each
transmitted page.
— 4-1
3. BEEPER
Adjusts volume level of
beeper.
LOW 4-3
4. SPEAKER
VOLUME
Adjusts the volume of the
one-way speaker.
LOW 4-4
5. RING VOLUME
Adjusts volume of ringer. LOW 4-4
6. AUTO DAYLIGHT
Changes for Daylight
Savings Time automatically.
OFF 4-4
7. TONE/PULSE
(For Canada only)
Selects dialing mode. TONE 4-3
8. LOCAL
LANGUAGE
(For Canada only)
Allows you to change the
LCD Language to French.
ENGLISH See
French
Manual
FAX: NO. & START
COPY: PRESS COPY