Filter
Top Products
4 - 2
INITIAL SETUP
Entering Text
When you are setting certain functions, such as the Station ID, you may need to
enter text into the MFC. Most number keys have three or four letters printed
above them. The keys for 0, #, and don’t have printed letters because they are
used for special characters.
By pressing the appropriate number key the correct number of times, you can
access the character you want.
Inserting spaces
If you want to enter a blank space, press once between numbers and twice
between characters.
Making corrections
If you entered a letter incorrectly and want to change it, press to move the
cursor after the last correct letter. Then press Stop; all letters above and to the
right of the cursor are deleted. Re-enter the correct text and/or digits. You can
also back up and type over incorrect letters.
Repeating letters
If you need to enter a character assigned to the same key as the previous
character, press
to move the cursor to the right.
If your Station ID has already been programmed, the screen prompts “1” to
make a change or “2” to exit without changing.
Press Key one time two times three times four times
2 ABC
3 DEF
4 GH I
5 JKL
6 MNO
7 PQRS
8 TUV
9 WXYZ