Filter
Top Products
SETUP RECEIVE
5 - 5
Polling
Polling is the process of retrieving faxes from another fax machine. You can
use your MFC to “poll” other machines, or you can have someone poll your
MFC.
All parties involved in polling must set up their fax machines to accommodate
polling. When someone polls your MFC to receive a fax, they pay for the call;
if you poll someone’s fax machine to receive a fax, you pay for the call.
Setting Up Polling Receive
Polling Receive is when you call another fax machine to receive a fax from it.
1
Press Function, 1, 2, 6.
2
Press or to choose ON
and press Set.
3
Enter the fax number you are polling.
4
Press Start.
The LCD shows DIALING.
Setting Up Sequential Polling Receive
Your MFC can request documents from several fax units in a single operation.
Afterward, a Sequential Polling Report will be printed.
1
Press Function, 1, 2, 6.
2
Press or to select Polling ON
and press Set.
3
Specify the destination fax machines you
wish to poll, using One Touch, Speed
Dial, a Group or the dial pad. You must
press Set between each location.
4
Press Start.
Your MFC will poll each number or
group member in turn for a document.
Some fax machines do not respond to the polling function.
POLLING RX:OFF?
SELECT <- -> & SET
PRESS START KEY
ENTER FAX NO.
POLLING RX:OFF?
SELECT <- -> & SET
POLLING RX:ON?
ENTER FAX NO.
PRESS START KEY
ACCEPTED
DIALING