Filter
Top Products
USER’S GUIDE
174 CyberSWITCH
The following table identifies the configuration requirements for possible security options for IP
Routing with PPP Bridge Devices.
Note: If CHAP Security is enabled, and Outbound Authentication has not been disabled, a CHAP
Secret must be entered for both the remote device and for the CyberSWITCH. Refer to
System Information regarding the System Secret. If Outbound Authentication has been
disabled, a CHAP Secret is not required for the remote device.
OFF-NODE DEVICE DATABASE LOCATION
CONFIGURING OFF-NODE DEVICE DATABASE LOCATION
USING CFGEDIT
1. Select Off-node Device Database Location from the Device Level Databases menu. If you need
guidance to find this menu, refer to the instructions provided in the On-node Device Database
configuration section. The following screen will be displayed:
2. Select the location of the off-node device database, or select None in order to use the on-node
device database.
Security Mode Configuration On-node Device Table Configuration Data
Calling Line Id PAP or CHAP
Security
Calling Line Id PAP Password
or
CHAP Secret
IP (Sub)
Network
Number
Disabled Enabled Not Requested Required Required if
only IP
Routing is
Enabled
Enabled Enabled Optional per
device entry
Required Required if
only IP
Routing is
Enabled
Enabled Disabled Required Optional Required if
only IP
Routing is
Enabled
Off-node Device Database Location Menu:
1) None (Use On-node)
2) VRA Manager
3) RADIUS
Current Off-node Device Database Location is "None (Use On-node)".
Select function from above or <RET> for previous menu: