Cabletron Systems CSX1200 Switch User Manual


 
USER’S GUIDE
294 CyberSWITCH
b. The screen includes default configuration values. If needed, make changes to the default
values.
c. Press <RET> to return to the IPX Device Spoofing menu. Press 2 to configure SPX
Watchdog Spoofing. The following menu will be displayed:
d. The screen includes default configuration values. If needed, make changes to the default
values.
e. Press <RET> to return to the IPX Device Spoofing menu. Press 3 to configure serialization
packet handling. The following menu will be displayed:
f. The screen includes default configuration values. If needed, make changes to the default
values.
g. Press <RET> to return to the IPX Device Spoofing menu. Press 4 to configure message
packet handling. The following menu will be displayed:
h. The screen includes default configuration values. If needed, make changes to the default
values.
Device Level IPX Watchdog Spoofing Menu:
1) Default Handling is Discard
2) Handling while the connection is up is Forward
3) Handling for the special period after disconnecting is Spoof
4) Special period of time after disconnecting is 120 Minutes
Select function from above or <RET> for previous menu:
Device Level SPX Watchdog Spoofing Menu:
1) Default Handling is Discard
2) Handling while the connection is up is Forward
3) Handling for the special period after disconnecting is Spoof
4) Special period of time after disconnecting is 120 Minutes
Select function from above or <RET> for previous menu:
Serialization Packet Handling:
1) Always Discard
2) Forward only when the connection is up
3) Always Forward
Current Serialization Packet Handling is "Forward only when the connection is up".
Select function from above or <RET> for previous menu: 1
Message Packet Handling:
1) Always Discard
2) Forward only when the connection is up
3) Always Forward
Current Message Packet Handling is "Forward only when the connection is up".
Select function from above or <RET> for previous menu: <RET>