Cabletron Systems CSX1200 Switch User Manual


 
USER’S GUIDE
540 CyberSWITCH
Destination
The route destination. This destination may be a network number, a subnet address, or a host
address.
Subnet-Mask
The mask used for the destination.
Next Hop
The IP address or interface name (for unnumbered interfaces) of the router that is the gateway
for the route.
Mtr
The cost of using this route (usually the number of hops to the destination).
P
The propagation flag, where
A = Always propagate
N = Do not propagate
H = Propagate when Next Hop Device Connected
1/2
RIP Version 1/Version 2 visibility flags determine whether or not this route is visible when
send the route using RIP 1 or RIP 2, where
0 = Invisible
1 = Visible
T
The type of route, where
A = Active Route, learned via RIP on a LAN interface
P = Permanent Route, learned via RIP on a WAN interface
S = Static Route, learned via IP Routing Table
H = Host Route, created when an IP Host Device is connected
Age
The time since the last update was received.
[System Name]> IP RIP ROUTES
Active Routes
Destination Subnet-Mask Next Hop Mtr P 1/2 TAge
----------------------------------------------------------------------
3.2.0.0 255.255.0.0 0.0.0.0 4 A 1/1 A30
3.3.0.0 255.255.0.0 0.0.0.0 4 A 1/1 A30
192.168.5.0 255.255.255.0 0.0.0.0 0 A 1/1 SN/A
4.4.4.1 255.255.255.255 0.0.0.0 0 A 1/1 HN/A
Inactive Routes
Destination Subnet-Mask Next Hop Mtr P 1/2 TAge
----------------------------------------------------------------------
4.0.0.0 255.0.0.0 0.0.0.0 0 H 0/1 SN/A