Filter
Top Products
Workgroup Remote Access Switch 191
C
ONFIGURING
N
ETWORK
L
OGIN
I
NFORMATION
Login Configuration Specific to RADIUS Server
LOGIN CONFIGURATION SPECIFIC TO RADIUS SERVER
CONFIGURING RADIUS SERVER LOGIN INFORMATION
USING CFGEDIT
1. Select option (3), Login Configuration Specific to RADIUS Server from the Network Login
Information menu. If you need guidance to find this menu, refer to the instructions provided
in the Network Login General Configuration configuration section. The following screen will be
displayed:
2. Selection (1) from the RADIUS Specific Device Login Menu allows you to change the password
control character:
3. Selection (2) from the RADIUS Specific Device Login Menu allows you to customize the
prompt order for device login. This prompt is particularly important, because the order of
prompts must be the same as the order expected by the RADIUS server. Selection (2) displays
the following:
RADIUS Specific Device Login Menu:
1) Change Password Control Character is DISABLED.
2) Prompt Order for Device Login.
Select function from above or <RET> for previous menu: 1
Enter control character used to switch from LOGIN to CHANGE PASSWORD mode.
Select the control character that you wish to us by typing
caret (‘^’) followed by another character (example: ^A),
or ‘0’ to disable [Default = DISABLED]? <RET>
RADIUS Device Login Prompt Order Menu:
Current Prompt Order is:
-----------------------------------------------------------------
First Prompt is LOGIN ID PROMPT (fixed)
Second Prompt is USER PASSWORD PROMPT
1) Prompt Order
Select function from above or <RET> for previous menu: 1
Prompts available for Second Prompt
1) USER PASSWORD
2) DYNAMIC PASSWORD
Select function from above or <RET> for previous menu: