Filter
Top Products
USER’S GUIDE
620 CyberSWITCH
fr clear clears the statistics counters for the selected frame relay
access and DLCI
fr clearall clears all statistics for the selected frame relay access and
DLCI
fr cong displays congestion control information for the selected
frame relay access and DLCI
fr d <DLCI “m”> sets DLCI value to “m” as default DLCI for the selected
frame relay access
fr dbg level displays the current debug level for frame relay
fr dbg level <level> sets the current debug level for frame relay
fr display displays the configuration information for the selected
frame relay access
fr lmi displays LMI link information for the selected frame relay
access
fr stats displays statistics for the selected frame relay access and
DLCI
ip addrpool displays the current IP address pool
ip arp displays current ARP cache table
ip filter trace <discard> <off> controls the tracing of packets which are discarded as a
result of IP filters
ip ping <host ip address> sends an ICMP echo message to the specified host
ip rip interface displays IP RIP interface information
ip rip routes displays IP RIP routing table(s)
ip rip send forces an IP RIP update message to be sent
ip rip stats displays IP RIP statistics
ip route displays the current routing table
ip route <IP address> displays the routing information for the indicated device
ip stats displays or resets current IP related statistics
ipconfig allows you to change the system’s default IP address
ipx diag <host>[timeout] sends a diag packet to the specified host to confirm
connectivity; timeout value optional
ipx ipxwan clear clears IPXWAN stats
ipx ipxwan stats <device> displays system-level or device-level statistics
Command
Use