Cabletron Systems CSX1200 Switch User Manual


 
USER’S GUIDE
574 CyberSWITCH
# No Control Block
Not currently supported.
# NEW & Existing PVC
The number of times a NEW PVC was indicated by a LMI STATUS message—but the frame relay
software believed the PVC already existed.
# PVC Not Configured
The number of times a frame was received containing an unknown DLCI value, and hence, an
unconfigured PVC.
# No NEW Bit
Not currently supported.
# Not Full ENQUIRY
The number of times a STATUS message was received containing a LINK INTEGRITY
VERIFICATION ONLY report type, when in fact a FULL REPORT was expected.
# Errored Full ENQUIRY
The number of times an errored STATUS message was received of type FULL REPORT.
# Delete Absent PVC
Not currently supported.
# Errored LMI Header
The number of LMI frames received in which the LMI encapsulation header was errored.
PVC RELATED STATISTICS
PVC State
The condition of the Frame Relay Permanent Virtual Circuit. Possible values are: TERMINATED,
INIT, NOT READY, and NETWORK OUTAGE. The definitions for the possible values are as follows:
TERMINATED
The PVC state entered when the PVC has been dynamically removed.
INIT
The PVC state entered when the PVC is ready for use.
NOT READY
The PVC state entered when the PVC has been marked unavailable by the network via a
STATUS message, an alarm condition, or failure of the LMI link.
NETWORK OUTAGE
The PVC state entered when the PVC has been marked unavailable. This follows the
receipt of a CLLM message indicating a network failure has occurred.
# PVC activations
The number of times the PVC has been marked available for use, or “up”.
# PVC deactivations
The number of times the PVC has been marked unavailable for use, or “down”.