Filter
Top Products
Workgroup Remote Access Switch 585
S
YSTEM
S
TATISTICS
SNMP Statistics
IfStatSentResponses
The number of RIP messages with ‘response’ command code sent on this interface.
IfStatSentUpdates
The number of triggered RIP updates actually sent on this interface. This explicitly does NOT
include full updates sent containing new information.
SNMP STATISTICS
If the SNMP Agent is enabled, you can access SNMP statistics by using the
snmp stats
command. Each of the following statistics are counters that refer to an MIB-2 SNMP group object.
snmpInPkts
The total number of messages delivered to the SNMP Agent from the transport service.
snmpOutPkts
The total number of SNMP messages that were passed from the SNMP Agent to the transport
service.
snmpInBadVersions
The total number of SNMP messages that were delivered to the SNMP Agent and were for an
unsupported SNMP version.
snmpInBadCommunityNames
The total number of SNMP messages delivered to the SNMP Agent that used an SNMP community
name not known to said system.
snmpInBadCommunityUses
The total number of SNMP messages delivered to the SNMP Agent that represented an SNMP
operation that was not allowed by the SNMP community named in the message.
snmpInASNParseErrs
The total number of ASN.1 or BER errors encountered by the SNMP Agent when decoding received
SNMP messages.
snmpInTooBigs
The total number of SNMP PDUs that were delivered to the SNMP Agent and for which the value
of the error-status field is “tooBig”.
snmpInNoSuchNames
The total number of SNMP PDUs that were delivered to the SNMP Agent and for which the value
of the error-status field is “noSuchName”.
snmpInBadValues
The total number of SNMP PDUs that were delivered to the SNMP Agent and for which the value
of the error-status field is “badValue”.